Description

Get more out of your Station by adding rungs. Make the holds bigger on the front of the board or to get an extra hold size on the backside of the board. The rungs have two different rounding, a sharper rounding and a smoother. For best training experience, use the smoother rounding to hang on, when mounted on the front of the board. On the back, you can use either the smooth or the sharp edge to hang on. If you’re looking to go as small as 4 to 8 mm, combine the sharper edge with inserts and you’ll have your challenge.

Specifications

Measures

• 420 x 24 x 12 mm

• 420 x 24 x 16 mm

Mounting

• Front board mount to make the holds bigger

• Mount on the backside of the board to get an extra size

The rung have two different rounding on the edges.
For best training experience: Use the 6mm rounding upwards when mounted on the frontside.
When used on the backside, mount either the 3mm or 6mm rounding to hang on.

Inserts

• To make the holds smaller

• Compatible with our 2-,3-,4- and 5 mm inserts

Material

• European ash

The Problemsolver. Add-on rungs are made out of solid wood. For them to maintain it’s form, please follow these guidelines:

• Bolts not to be used outside

• Use a soft brush to clean the holds

• Do not tighten too hard

• Max load: 100kg on the add-on rungs

Please note: The add-on Rungs are not to be used together with our mounting clamp set.

WARNING! BY USING THIS PRODUCT, YOU ACCEPT ALL RISK AND RESPONSIBILITY FOR ANY INJURY, DAMAGE OR DEATH THAT MAY RESULT.

      Terms & Conditions         Return Policy